Accent Colors

An accent color is essentially a shade used in comparatively small quantities in a space, to add impact and interest. Depending on the outcome you wish to arrive at, these colors can be complementary or contrasting the the main tone of the room, but either way they are there to add emphasis to the overall colour, not detract from it.

Various of colors available

Various of colors available

Application Method

Stir contents before using.

FIRST COAT:

  1. Use a round edge trowel.
  2. Apply a thin layer of VELLMA and cover entire surface and then remove excess by tilting trowel to approximately 30°.
  3. Once excess has been removed, smooth surface using a 30° angle.
  4. Let it dry for 8 hours.

SECOND COAT:

  1. Apply thin layer of VELLMA, use overlapping long and short strokes.
  2. Cover the surface thoroughly, filling voids and removing high spots.

BURNISH:

  1. Wait around 15 to 30 minutes before burnishing with the same trowel to achieve high gloss finish.
  2. Let it dry for at least 24 hours before moving on to the finish treatment.
  3. Apply VELLWAX and buff off evenly will add durability to the surface.

Five kilogram (11 Lbs) covers up 60 – 80 sq. ft. on a smooth wall, significantly less on acoustical tile or rough surface. We do not recommend thinning down the plaster but if you wish to create other effect, thinning not more than 1 oz. (29.6ml mL) of water per 11 Lbs (5kg) of plaster.

DRYING TIME:
Plaster only when surface and air temperatures are 50-90 °F (10-32 °C), wait 8 hours before recoating or 24 hours before applying MACOAVELL VELLWAX.